Big Power on a Budget! Do it right with Manley.
Manley H-Beam Rod Set.
Set of 4 Rods w/ ARP hardware.
Each rod is rated for 175hp per. (great for motors making ~600hp)
20mm wrist pins.
Don't be fooled; not all H-BEAMS are created equal. Manley H-BEAMS are not only very
"economically" priced, but they are finished to the same exacting tolerances and high
quality standards as our Sportsmaster® and Pro Series rods. Final hone size, thread detail,
bend and twist - these are attributes we take very seriously. You will find the Manley
H-BEAM rods superior to others on the market.
Manley "H" Beam connecting rods are manufactured from 4340 forgings and under the same scrutiny as their top of the line Pro Series rods. There are distinct differences between Manley products and their ‘less-expensive’ competition. Manley “H” Beam rods may be economically priced, but they are finished to the same exacting tolerances and high quality standards as their Pro Series rods. Big and small end bores are held to +/- .0002” while also holding to a maximum specification of .004” over 8” on the critical attributes of “bend and twist.” Sets are weight matched to +/- 1.5 grams and genuine ARP bolts are used exclusively.
Manufactured from 4340 forgings
Heat treated, stress relieved, shot peened and magnafluxed
Set of 4 rods Center-to Center: 5.669" Big End Bore: 1.992" Big End Width: .980" Pin Diameter: .787" (20mm) Pin Bore: .7881" Avg. Gram Weight: 580
Weight matched sets +1.5 grams
Cap Fasteners are 3/8" ARP 2000 Cap Screws, 3/8" ARP 2000 bolts
Excellent for nitrous, turbo/supercharged (Up to 650hp), and high RPM applications
Fits: VW/Audi 1.8 *20mm wrist pin *most models will require 20mm Pistons.
VW/AUDI 1.8T engines 5.669 length
Connecting Rod Length Center to Center (in): 5.669 in.
Connecting Rod Beam Style: H-beam
Connecting Rod Material: Forged 4340 steel
Connecting Rod Finish: Shot-peened
Wrist Pin Style: Floating
Clearanced for Stroker: No
Cap Retention Style: Cap screw
Connecting Rod Bolt Brand: ARP
Connecting Rod Bolt Diameter: 3/8 in.
Connecting Rod Bolt Material: ARP2000 alloy
Fastener Yield Strength (psi): 200,000 psi
Connecting Rod Bolt Head Style: 12-point
Approximate Connecting Rod Weight (g): 574
Big End Bore Diameter (in): 1.9920 in.
Pin End Bore Diameter: 0.788 in.
Big End Width (in): 0.980 in.
Advertised Horsepower Rating: 600 hp
Weight Matched Set: Yes
This product hasn't received any reviews yet. Be the first to review this product!